Sanifloor 1, for tiled floors

Sanifloor 1, for tiled floors

Sanifloor allows a shower to be installed easily and economically without accessing sewer pipes. The water reaches the pump through a gully which discharges it back to the sewer line. A stylish walk in shower is easy with Sanifloor. It can pump up to 3m vertically or 30m horizontally. Higher flow rate means it can be used with powerful rain head showers.

  • Wireless communication between the pump and plug for easy installation.
  • Easy to maintain replaceable detection module
  • Installation without the need for major work: small, local excavation: small evacuation diameter (25 mm)
  • Large volume output 30 l/min (compatible with rainwater)

Documents to dowload

Sanifloor + includes a suction pump and a plug, and makes it possible to install a walk-in without the need for major building work. The wireless detection system in the plug makes fitting particularly easy. The replaceable detection unit also simplifies maintenance. Designed specifically where floor drainage is required but where space...

See more

Sanifloor+ 1 datasheet

Dimensions l x w x h (mm)
295 x 191 x 164

*Packing list: Sanifloor+ pump, dedicated drain, check valve, connectors. 

Ref: EAN 3308815076232

Sanifloor + 1
Number of entries 1
Maximum flow rate 30 L/min at 1 m
Inlet diameter 16 mm
Discharge pipework 32 mm
Motor power 400W
Voltage 220-240 V
Power frequency 50 Hz
Maximum absorbed current 1.7 A
Electrical class I
IP rating IP44
Maximum incoming water temperature 35 °C
Maximum horizontal discharge 30 m
Max. head (Q0) 3 m
Shower tray height 0 cm
Total height 68 mm
Materials used for the drain ABS / stainless steel
Outlet diameter of the drain 16 mm